Tiger Cat M760

 

 

Basic Environmental operates three Tiger Cat M760 machines in our land clearing operation. The Tiger Cat M760 is a low ground pressure, 425hp unit, equipped with flotation tires, designed specifically for the timber industry.  The Fecon mulching head operates with a nine foot cutting width.  The M760 is used for clearing material from heavy brush to large diameter trees.  Mulching material and grinding all stumps at or just below ground level.


Tiger Cat 822 Track/Boom Machine

 

 

Our Tiger Cat 822 Track / Boom Machine in operation.  The Tiger Cat 822 is a low ground pressure, 300hp unit, with a 25 foot reach and a zero tail swing.  The machine is designed specifically for the timber industry working very effectively on steep slopes.  The Fecon mulching head operates with a 56 inch cutting width.  The 822 is used for clearing material from heavy brush to large diameter trees.  Grinding from the top of the tree down, stumps are left at or just below ground level. 


CAT 320CL Track/ Boom Machine





Our CAT 320CL Track / Boom Machine in operation. The CAT 320CL is a low ground pressure, 440hp unit, with a 30 foot reach. The machine is designed specifically for the timber industry working very effectively on steep slopes and hard to reach areas. The mulching head operates with a 56 inch cutting width. The 320CL is used for clearing material from heavy brush to large diameter trees. Grinding from the top of the tree down, stumps are left at or just below ground level.


FTX 140

 

Our Fecon FTX 140 is a 140hp, low ground pressure machine operating with a six foot wide mulching head. The FTX 140 is a very powerful and designed to operate on steep slopes and mulch heavy brush to small diameter trees.


Gyro Trac GT25

Our Gyro Trac GT25 machine in operation.   The Gyro Trac GT25 is a low ground pressure, 230hp unit operating a mulching head with an eight foot cutting width.  The GT25 is used for clearing heavy brush to small and medium diameter trees.  Grinding all material at or just below ground level.  

To increase efficiency, we accompany our operation with the following equipment:

Bob Cat S300 operating with:

• Brush Cutter Decks
• Bunching Shear (for removing trees in sensitive areas)
• Grapple

Kubota 100hp 4WD Tractor operating with:

• PTO driven Fecon rear mulching head
• 180 degree over reaching grapple